Hayabusa - Billet Triple Clamp

Allows the fork tubes to slide up thru the triple tree clamp to lower the bike. Billet aluminum.

Installation
It is basically a simple unbolt and bolt up process. You will need to remove the stock triple tree cover by removing the top four bolts that hold it down. You will also need to remove the handle bars and reservoirs on both sides to get the tree cover off. Once you have removed it, install the new unit and tighten the bolts down to factory specs as printed in the factory service manual. Now reinstall the components you removed in reverse order.

Due to factory taper on the front forks you can only safely raise the front fork tubes up a max of 3/4 inch. You MUST make sure and check that the lower triple tree pinch bolts are within the area that provide a strong consistent clamping surface.

Related Products:
Rear Lowering Links
Front End Lowering Strap