Picture may vary from actual product
If you have a 99-07, installing a 2008 model crankshaft is a great way to add a reliable 2mm stroke and gain more torque and power!
*Note - If you have a 99-07 engine and want to run this crankshaft, you will need to switch to 08 model main bearings and run your stock rods or 99-07 model aftermarket rods. Be sure to measure all bearing areas with a squish gauge and select the proper size per the Service Manual after you get the new crankshaft. Also, be sure to change your rod bolts.
The .040" Base Gasket/Spacer Plate is required for installation so be sure to add that item to your order. (You will still need to use one (1) stock base gasket with this spacer plate)
Gain even more power when this kit is combined with the Brock's Performance Drop In Piston and Cam Kit!
When used with a 84mm Piston Kit, a 1441cc monster will be created!